How can I reduce any additional cost for CNC Prototyping?
- Use inner radii at the corners of your designs and avoid designs with sharp internal corners.
- Design all components with standard sizes if possible. For example, it is more affordable and economical to produce parts 10 meters tall than 10.5 meters, as the latter involves manual input.
- Avoid deep pockets in your design as it removes much of the material resulting in additional cost.
- Make sure to design parts without drafting.
- Reduce the number of angles and sides the part must be machined by simplifying its design. The cost of part machining would increase with additional angles, axes, and sides.
